Contact Us
LKV824P-N

1x4 HDMI Splitter Extender

· Features
1. Zero latency transmission.
2. Split and extend one HDMI input signal to four identical network output signals.
3. Support up to 4K@60Hz resolution.
4. Transmission distance up to 70 meters by using Cat6/6A/7 cables.
5. Support IR passback (20KHz~60KHz).
6. The transmitter supports HDMI loop out.
7. The receiver supports 3.5mm stereo output.
8. Support EDID switch for setting.
9. Support RS-232 command control.
10. Surge Protection, Lightning Protection, ESD Protection.
11. Equipped with rack mount ears.
12. Support PoC, only the transmitter is required to supply power.
13. Supports stable 24/7 operation.
Introduction
Parameters
Downloads

1757587584369918.jpg

Transmission protocol
ipcolor
Distribution mode
1 IN 4 OUT
Transmission distance
CAT6/6A/7≤70m
HDMI signal
HDMI 2.0, HDCP 2.2
HDMI Resolution
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 1280x960, 1280x800, 1280x1024, 1680x1050, 1600x1200, 1600x900, 1024x768, 800x600, 1920x1200, 3840x2160@24/25/30/50/60Hz, 4096x2160@24/25/30Hz
Audio formats
4K: LPCM/DTS/Dolby Digital 5.1;
1080P: LPCM/DTS/Dolby Digital 5.1/Dolby Digital plus7.1
IR
Support IR passback function (20KHz~60KHz)
RS-232
3 pin: TxD-RxD-GND, follows RS-232 levels
Working temperature
-20~60℃
Storage temperature
-30~70℃
Humidity (no condensation)
0~90% RH
Protection
ESD protection
1a Contact discharge level 2
1b Air discharge level 3
Implementation of the standard: IEC61000-4-2
Lightning protection
Surge protection
Power supply
TX: DC12V/2A
Power consumption
TX+RX<11W
Material
Iron
Color
Black
Weight
TX: 672g ,RX: 145g
Dimension
TX: 265.0(L) x 104.0(W) x 23.0(H)mm
RX: 85.0(L) x 75.5(W) x 16.5(H)mm
Promotional Material

Video Material

Product Manual

Product specification

Update Firmware