Contact Us
iMCS-IM01

Full HD HDMI™ over IP Matrix

This 1920x1200@60Hz HDMI over IP matrix kit, including a transmitter and a receiver, realizing switching, extending and distributing 1920x1200@60Hz audio and video signals via the IGMP switch. Built on ipcolor STREAM. technology to deliver high-definition and low-latency transmission. The transmitter can extend 256 signal sources and switch to 256 receiving terminals. The HDMI signal can be extended up to 120 meters over Category 6 or higher-level networking cables while supporting one-to-one connection and many-to-many connection. Equipped with HDMI loop out, bi-directional IR passback, RS-232 command control, I/O, POE, etc. Widely used in audiovisual conference, transportation control center, radio and television, education and training and other fields.
Introduction
Parameters
Downloads

1741141316367942.jpg

HDMI length
≤ 5m
Maximum transfer rate
4.96Gbps
Compatibility
HDMI 1.3,HDCP 1.4
Resolutions
1080p@50/60Hz,720p@50/60Hz, 1920x1200@60Hz
Connection types
One-to-one connection
Many-to-many connection
Switch cascading
Transmission distance
CAT5E 100m / CAT6 120m
Transmission latency
70~130ms
HDMI output
LPCM 2.0
IR receiving range
≤ 5m
IR frequency
20kHz~60kHz
RS-232 (GND/RXD/TXD)
Default baud rate: 115200
Supported: 2400, 4800, 9600, 19200, 38400, 57600, 115200
Power Supply
DC 5V/2A(alternative)
Power Consumption
TX ≤ 5.5W,RX ≤ 3.5W
Working temperature
-20℃~60℃
Storage temperature
- 30℃~70℃
Humidity
0~90%RH (no condensation)
Housing
lron
Weight
TX:523g,RX:514g
Color
Black
Dimensions
191.0(L)*96.0(W)*25.0(H)mm
Protection
ESD protection
1a Contact discharge level 2 (±4KV)
1b Air discharge level 3 (±8KV)
Implementation of the standard: IEC61000-4-2
Lightning protection, Surge protection
Product Manual

Product specification

Update Firmware