Contact Us
LKV992-V2.0

4K@60Hz HDMI Over IP Optical Extender

This is an HDMI over IP optical extender kit. With this device, UHD HDMI signals can be transmitted at high definition and ultra low latency over 40km of single-mode fiber optic cable at 4K@60Hz 4:4:4 HDR resolution. It supports point-to-point connection or one-to-many connection through gigabit switch, and cascading of switches is also supported. This HDMI extender kit has features including HDMI loop out, bi-directional IR passthrough, ARC, RS-232 passthrough, and audio extraction through S/PDIF output on the receiver. This extender kit is a reliable UHD video transmission and distribution solution which can be widely used in security monitoring, rail transit, broadcasting, smart cities, conference and other fields.
Introduction
Parameters
Downloads

1740567506373743.jpg

HDMI length
≤ 5m
Maximum transfer rate
18Gbps
Compatibility
HDMI 2.0 (Deep color, 4K, HDR10, YUV4:4:4)
HDCP 1.4/HDCP 2.2
Resolutions
4096x2160@24/25/30/50/60Hz, 3840x2160@24/25/30/50/60Hz, 1080p@24/25/50/60Hz, 720p@50/60Hz, 1024x768, 1280x768, 1280x800, 1280x960, 1280x1024, 1440x900, 1400x1050, 1600x900, 1680x1050, 1920x1080, 1920x1200
Optical module types
SFP single-mode (default configuration), SFP multimode
Fiber connector type
LC
Connection types
One-to-one connection
One-to-many connection
Switch cascading
Transmission distance
≤40km (single-mode)
Transmission latency
≤16ms
HDMI Out
LPCM2.1CH//DTS-Audio/ Dolby Atmos DD+
S/PDIF Out(ARC)
LPCM 2.1CH/DTS-Audio/Dolby Digital 5.1CH
Audio sampling rate
44.1kHz, 48kHz, 88kHz, 96kHz, 176kHz, 192kHz
Audio bit depth
16bit, 24bit
ARC
Supported
Receiving range
≤ 5m
Infrared frequency
20kHz~60kHz
CEC
supported
RS-232 (GND/RxD/TxD)
Default baud rate: 115200 Supported: 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400
Power Supply
DC 5V/2A
Power Consumption
TX:< 7.5W,RX:< 7.5W,
Working temperature
-20℃~50℃
Storage temperature
-30℃~70℃
Humidity
0~90% RH (no condensation)
Housing
lron
Weight
TX:369.0g,RX:368.0g
Color
Black
Dimensions
124.6 (L) x115.0 (W) x21.3 (H) mm
Protection
ESD protection 1a Contact discharge level 2 (±4KV) 1b Air discharge level 3 (±8KV) Implementation of the standard: IEC61000-4-2
Lightning protection, Surge protection
Product Manual

Product specification

Update Firmware