Contact Us
LKV655-V2.0

Full HD HDMI Wireless Extender

This is a 1080P@60Hz HDMI wireless extender, including a transmitter and a receiver. Adopting ipcolor STREAM technology can realize high definition and low-latency transmission. Based on the 5G wireless frequency band, with stable anti-interference and safety performance. It supports up to 1-to-4 wireless transmission, and the transmission distance of 1-to-1 can reach 50 meters, effectively solving problems caused by complicated wiring. It's an ideal wireless video transmission solution for video conferences, home entertainment, multimedia education, etc.
Introduction
Parameters
Downloads

1740389266180846.jpg

Voltage/Current
DC 5V/1A
Power consumption
TX ≤ 3.5W, RX ≤ 3W
HDMI version
HDMI 1.3
HDCP version
HDCP 1.4
Maximum transfer rate
4.96Gbps
Resolution supported
1080P@50/60Hz, 720P@50/60Hz, 1920x1200, 800x600, 1024x768, 1280x720, 1280x960, 1440x900, 1680x1050, 1920x1080
Input and output TMDS signal
0.7~1.2Vp-p(TMDS)
Input and output DDC signal
5Vp-p(TTL)
Wi-Fi Frequency bands
5.18~5.24 GHz
Transmission distance
One-to-one ≤ 50m; One-to-two ≤ 40m;
One-to-three ≤ 35m; One-to-four ≤ 30m
Latency
1080P@60Hz: 70~120ms For reference only, delays may vary depending on the resolution, transmission distance, and connection capacity
Connection types
One-to-one
One-to-two
One-to-three
One-to-four
SSID pairing
Supported
ESD protection
1a Contact discharge level 3
1b Air discharge level 3
Standard: IEC61000-4-2
Lightning protection, Surge protection
Infrared frequency
20~60kHz
Receiving range
≤ 5m
Working temperature
-20~60℃
Storage temperature
-30~70℃
Humidity (no condensation)
0~90% RH
Dimension
TX: 115(W) x 125(L) x 20.6(H) mm
RX: 115(W) x 125(L) x 20.6(H) mm
Color
Black
Material
Iron
Net weight
TX: 305g; RX: 303g
Product Manual

Product specification

Update Firmware